In stepper motors, there are some terms that may be more difficult to understand for those who are new to the Stepper Motor industry. Today, the editor will briefly summarize them for your reference.
The rotation produced by the rotor at each step is measured in degrees.
The angle at which the rotor rotates every time the motor receives a pulse. For a linear motor, the step is a linear distance.
Rotation steps per week:
The total number of steps required for the rotor to rotate 360°. The sum of the resistance moment and the moment of inertia.
The sum of the resistance moment and the moment of inertia.
PULL IN (draw in) torque:
It overcomes the acceleration torque of the rotor inertia, and the external load and various friction torques fixedly connected during acceleration. Therefore, the pull-in torque is usually less than the pull-out torque.
PULL OUT torque:
The maximum torque that the motor can produce at a constant speed. Because the speed is constant, there is no moment of inertia. The kinetic energy and inertial load inside the rotor increase the pull-out torque during the cycle.
Positioning or residual torque:
The torque required to rotate the output of the motor when no current flows through the windings.
Torque to inertia ratio:
The holding torque is divided by the rotor moment of inertia.
The torque produced by the motor at a certain step rate. Dynamic torque can be represented by PULL IN (draw in) moment or PULL OUT (draw out) moment.
When the winding is supplied with steady-state direct current, the torque required to make the motor rotate on the output shaft.
An electrical control device used to run a stepper motor. This includes power supplies, logic programmers, switching elements, and a variable frequency pulse source that determines the step rate.
The inertial measurement value of an object's acceleration or deceleration. It is used here to refer to the inertia of the load to be moved by the motor, or the inertia of the rotor of a stepper motor.
Linear step increment (or step length):
The linear displacement produced by the lead screw every time the rotor rotates one step angle.
The number of pulses applied to the motor windings per second (PPS). The pulse rate is equal to the motor step rate.
Pulses per second (PPS):
The number of steps produced by the motor in one second (sometimes called "steps per second"). This is determined by the pulse frequency generated by the motor driver.
In the case that the motor does not lose step, the given load is increased from the original low step rate to the maximum, and then reduced to the original rate.
Single step response:
The time required for the motor to perform a complete step.
Maximum temperature rise:
The designed motor allows temperature rise. The temperature rise of the motor is an inherent characteristic of the increase in temperature when the motor is energized. Electric energy loss mainly includes resistance heating (copper loss), iron loss and friction loss. The temperature of the motor is the sum of the total loss heating temperature and the ambient temperature.
20BY25-007 Permanent Magnet Stepper Motor is a type of Permanent Magnet Stepper Motor and also belongs to Stepper Motor.Permanent magnet stepper motors use a permanent magnet (PM) in the rotor and operate on the attraction or repulsion between the rotor PM and the stator electromagnets.
MAINTEX's PM stepper motors are widely applied in many innovative applications, including: computer equipment, photographic systems, optoelectronic devices, valve control, ATM equipment, CNC machine, automatic winding machines, electronic clocks and medical equipment, etc.
20BY25-007 Permanent Magnet Stepper Motor Parameters
Drawing of 20BY25-007 Permanent Magnet Stepper Motor
Shenzhen Maintex Intelligent Control Co., Ltd.
Shenzhen Maintex Intelligent Control Co., Ltd. owns existing factory more than 26 thousand square meters, net assets over billions of dollars, nearly a thousand employees, and over 30 production lines with the annual output of more than 35 million units.The product of Maintex covering over twenty countries and regions around the world, and has been widely praised by customers.
MAINTEX's main products are precision permanent magnet Stepper Motor, permanent magnet Dc Motor, brushless motor, precision gear motor, rotary transformer and other micro motor products, as well as the treadmill motor control system, train model, electric pump and electromechanical integration products. These products are widely used in security systems, financial systems, industrial control systems, vehicle systems, retail services and office automation and other fields. At the same time, the company also provide personalized application solutions of micro electromechanical products.
MAINTEX strives to realise products diversification and differentiation, and to build the leading enterprise in the motor industry.The brand MAINTEX has become a high recognition brand in presicion and intelligent control industry with a short period of time.
- Company Name: Shenzhen Maintex Intelligent Control Co., Ltd.
- Representative: Weiting Wang
- Product/Service: Stepper Motor , Brushless motor , Dc motor , treadmill used motor , Brushed Dc Motor , Fuji motor
- Capital (Million US $): RMB:40 Million Yuan
- Year Established: 2012
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
- No. of Production Lines: Above 30
- No. of R&D Staff: 41 -50 People
- No. of QC Staff: 41 -50 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Zhengde Science Park, No. 8, Pingdi Street, Longgang District
- Contact Person: Ms. MAINTEX
- Tel: 0086-755-36518326
Premium Related Products